Magnetic Particle Inspection

Magnetic Particle InspectionMagnetic Particle Inspection is a nondestructive testing method used for detecting surface and sub- surface flaws and defects. MPI is fast and relatively easy to apply, and surface preparation is not as critical as it is for other NDT methods. These characteristics make MPI one of the most widely utilized nondestructive testing methods. MPI uses magnetic fields and small magnetic particles similar to iron filings to detect flaws in components. The only real limitation is that the component being inspected must be made of a ferromagnetic material such as iron, nickel, cobalt, or one of their alloys. The method is used to inspect a variety of product forms including castings, forgings, and weldments. The structural steel, automotive, petrochemical, power generation, and aerospace industries are a few examples that utilize magnetic particle inspection. Underwater inspection is another area where magnetic particle inspection may be used to test items such as offshore structures and underwater pipelines.

Contents MPI Level – 1

  1. Magnetic particle testing terminology
  2. Properties of magnetic fields
  3. Principles of magnetic particle inspection
  4. Magnetic particle inspection equipment
  5. Equipment calibration
  6. Defect detection and evaluation
  7. Magnetic particle inspection techniques
  8. Application of a written instruction
  9. Relevant standards & H&S considerations
  10. PCN documentation
  11. Product technology
  12. Extensive practical element

Contents MPI Level – 2

  1. Properties of magnetic fields
  2. Principles of magnetic particle inspection
  3. Magnetic particle inspection equipment
  4. Equipment calibration
  5. Defect detection and evaluation
  6. Magnetic particle inspection techniques
  7. Relevant standards
  8. PCN documentation
  9. Product technology
  10. Relevant standards & H&S considerations
  11. Extensive practical element

Contents MPI Level – 3

  1. PCN requirements for Level 3 approval
  2. Complementary NDT methods
  3. Product technology
  4. Quality assurance, quality control and supervision
  5. Specifications/procedures and techniques
  6. Analysis of MPI reports
  7. Advanced MPI theory and revision
  8. Analysis of procedures
  9. Procedure writing
  10. Mock examinations

 

Venue : Lahore Duration :

Enroll Now